Home

Vacuum injection

Special-purpose machine

Surface technology

      MasterFinish Series

      MicroProFinish

      MicroFinish

      MasterClean

Accessories

Information request

Contact address

News

MasterClean

Every plastic processor knows the problem of contamination of moulds. Not only cleaning of colour pigment and filler deposit but also cleaning of over-flown moulds or contaminated screws belong to the daily process of a plastic moulder.

By means of abrasion-free blasting media of various grain diameters, you can remove all plastic adhesion without changing the structure and without damaging engravings or parting edges, mostly in a few minutes. Coated surfaces - provided that the coating is correct - can be also cleaned without being damaged.

There is no undesirable side-effect as no chemicals are used and the surfaces to be cleaned are not exposed to high temperature.

 

MasterClean 95	Screw cleaning automat MasterClean Plus

Example:
segments of a compounding screw

In order to remove thick contamination, a pressure blasting unit with large capacity is necessary. The blasting medium is filled into the special pressure container and struck with compressed air directly on part surface. By means of this technique, the blasting medium is accelerated to a high speed to reach an optimal cleaning effect even against thick plastic adhesion. For cleaning of large parts like extruder screw, MasterClean is equipped with side doors which enable an easy handling of the parts (Rubber-lined openings in the doors for long parts are available as option).

| to the top | Go to "MasterFinish" | back to "Surface Technology" | main menu |